Influences of Triton X-100 on Hemoglobin Behaviors in Hemoglobin/Acyclovir/Triton X-100/H2O System

The influences of Triton X-100 on hemoglobin （Hb） behaviors were studied by the methods of UV-Vis spectrum, fluorescence spectrum, HPLC, conductivity, zeta potential and negative-staining transmission electron microscope in Hb/acyclovir/Triton X-100/H2O system. With the increase of Triton X-100 concentration in the system, the percentage of the free acyclovir increased from 58%--63% to 90%--94%. The static quenching constant and the association number of acyclovir to Hb decreased. The fluorescence spectrum, conductivity, zeta potential, fluorescence polarization and negative-staining morphology of Hb tended to recover to those of the original state of Hb in the same concentration of Hb. The interaction between Triton X-100 and Hb is stronger than that between acyclovir and Hb. Most Triton-X-100 was associated with Hb at low Triton X-100 concentration. But the interaction of Triton X-100 with Hb was apparently dominant in high Triton X-100 concentration. The Hb structure was unfolded and finally denatured.     

Simultaneous speciation of mercury and butyltin compounds in natural waters and snow by propylation and species-specific isotope dilution mass spectrometry analysis

A robust method has been developed for simultaneous determination of mercury and butyltin compounds in aqueous samples. This method is capable of providing accurate results for analyte concentrations in the picogram per liter to nanogram per liter range. The simultaneous determination of the mercury and tin compounds is achieved by species-specific isotope dilution, derivatization, and gas chromatography–inductively coupled plasma mass spectrometer (GC–ICP–MS). In derivatization by ethylation and propylation, reaction conditions such as pH and the effect of chloride were carefully studied. Ethylation was found to be more sensitive to matrix effects, especially for mercury compounds. Propylation was thus the preferred derivatization method for simultaneous determination of organomercury and organotin compounds in environmental samples. The analytical method is highly accurate and precise, with RSD values of 1 and 3% for analyte concentrations in the picogram per liter to nanogram per liter range. By use of cleaning procedures and SIDMS blank measurements, detection limits in the range 10–60 pg L^–1 were achieved; these are suitable for determination of background levels of these contaminants in environmental samples. This was demonstrated by using the method for analysis of real snow and seawater samples. This work illustrates the great advantage of species-specific isotope dilution for the validation of an analytical speciation method—the possibility of overcoming species transformations and non-quantitative recovery. Analysis time is saved by use of the simultaneous method, because of the use of a single sample-preparation procedure and one analysis.     

Ion Transfer in CdF<Subscript>2</Subscript>-based Iso- and Polyvalent Solid Solutions

The ionic conductivity of solid solution Cd_0.77Sr_0.23F₂ is 1.6 × 10⁻⁴ S/cm at 500 K. The conduction mechanism changes from a vacancy mechanism to an interstitial one at 523–553 K. In solid solutions Cd_0.9R_0.1F_2.1 (R = La-Lu, Y), the activation enthalpy of conduction decreases from 0.9 to 0.8 eV with decreasing ionic radius of R³⁺, raising the 500-K conductivity from 6 ×10⁻⁶ S/cm for La³⁺to 6 × 10⁻⁵ S/cm for Lu³⁺. For crystalline Cd_0.95In_0.05F_2.05, ionic and electronic conductivities at 313 K equal 5 × 10⁻⁴ and 5 − 10⁻⁶ S/cm.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 627–632.Original Russian Text Copyright © 2005 by Sorokin, Buchinskaya, Sul’yanova, Sobolev.     

Electroreduction of α-glucose on CNT/graphite electrode modified by Zn and Zn–Fe alloy

Electroreduction of -glucose to form sorbitol on Zn/CNTs and Zn alloy/CNTs electrodes has been investigated in this paper. Carbon nanotubes (CNTs) used in this paper are grown directly on graphite disks by chemical vapor deposition. Zn and Zn alloy are electrodeposited on the activated CNTs/graphite electrode by pulse galvanostatic method. The micrographs of Zn/CNTs and Zn alloy/CNTs electrodes are characterized by scanning electron microscopy. The results show that the current efficiency of -glucose reduction on CNTs electrodes is much better than that on flat Zn electrodes. The order of the current efficiency on different electrodes is as follows: Zn/CNT (0.58) Zn–Fe/CNT (0.57)>Zn–Ni/CNT (0.43) Zn/graphite (0.42)>Zn (0.40). It indicates that CNTs have good potential application in electrosynthesis. Additionally, effects of some operating parameters, such as pH, temperature and -glucose concentration, on the current efficiency of -glucose reduction are also discussed.     

Preconcentration and separation of iron, zinc, cadmium and mercury, from waste water using Nile blue a grafted polyurethane foam

The present work describes a novel method for the incorporation of Nile blue A into polyurethane foam matrix. This foam material was found to be very suitable for the extraction of metal ions from aqueous solutions. The characterization of Nile blue A grafted foam and the effect of halide concentration, pH, shaking time, extraction isotherm and capacity have been investigated. This foam material was found to be suitable for the separation and preconcentration of iron (III), zinc (II), cadmium (II) and mercury (II) from waste water. The extraction was accomplished in (15-20) minutes. Iron was separated from acid medium (2-4 M HCl), zinc from (3-5 M HCl), cadmium from (4-6 M HCl) as thiocyanate complexes and mercury was separated from (1-2 M HCl) as chloride.     

聚烯烃（聚乙烯）低温热氧化与降解

综述了近年来聚烯烃特别是聚乙烯的低温热氧化机理，动力学以及氧化降解研究现状及发展，指出现今低温热氧化与降解研究意义。     

Some Reactions of 5-(3 or 4-Pyridyl)-1,3,4-Oxadiazoles with Amines and Hydrazines

2-Amino-and 2-hydrazino-5-(3 or 4-pyridyl)-1, 3, 4-oxadiazoles [II_i-k] have been prepared by racting 2-chloro derivatives with the corresponding amines or hydrazines, the 2-hydrazino (II_i-k) compounds that obtained were heated with carbon disulphide and alcoholic potassium hydroxide where 5-(3 or 4-pyridyl)-1,3,4-oxadiazolo (2,3-C)-1,2,4-triazole 5-thione (III_a-c) were obtained, the given structures were biologically screened.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

Voltammetric, chronocoulometric and spectroelectrochemical studies of electropolymerized films based on Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine: effect of high pH

Electropolymerized thin films of Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine, immersed in solutions of relatively high pH, have been studied electro- and spectroelectrochemically. Cyclic voltammetry and chronocoulometry were used to characterize films deposited on glassy carbon electrodes. Spectroelectrochemistry and ellipsometry measurements were performed on indium tin oxide (ITO) surfaces coated with the zinc and cobalt complexes and correlated to the electrochemical information collected using glassy carbon electrodes. Studies at high pH are motivated by the efficient increase in luminol chemiluminescence at high OH⁻ concentration, and by potential application in luminescence sensors. Although the films are not removed, some structural changes occur when they are exposed to solutions of high pH. In addition, an estimation of the number of monolayers has also been calculated. The atomic diameters of cobalt and zinc are very close in value, but the estimated number of monolayers, based on cyclic voltammetric data, for a given number of electropolymerization cycles is approximately four-fold higher in the zinc-based film. This would correspond to three-fold thicker films when zinc is the central metal ion. Ellipsometry measurements have been correlated with cyclic voltammetric data to confirm that film thickness varies among the different complexes, even though the conditions of electropolymerization are the same.     

The simultaneous saccharification and fermentation of pretreated woody crops to ethanol

Four promising woody crops (Populusmaximowiczii x nigra (NE388), P.trichocarpa x deltoides (Nll), P.tremuloides, and SweetgumLiquidambar styraciflua) were pretreated by dilute sulfuric acid and evaluated in the simultaneous saccharification and fermentation (SSF) process for ethanol production. The yeastSaccharomyces cerevisiae was used in the fermentations alone, and in mixed cultures with β -glucosidase producingBrettanomyces dausenii. Commercial Genencor 150L cellulase enyme was either employed alone or supplemented with β- glucosidase. All SSFs were run at 37 …C for 8 d and compared to saccharifications at 45…C under the same enzyme loadings.S. cerevisiae alone achieved the highest ethanol yields and rates of hydrolysis at the higher enzyme loadings, whereas the mixed culture performed better at the lower enzyme loadings without β -glucosidase supplementation. The best overall rates of fermentation (3 d) and final theoretical ethanol yields (86–90%) were achieved with P.maximowiczii x nigra (NE388) and SweetgumLiquidambar styraciflua, followed by P.tremuloides and P.trichocarpa xdeltoides (N1l) with slightly slower rates and lower yields. Although there were some differences in SSF performance, all these pretreated woody crops show promise as substrates for ethanol production.